Category Archives: NOZZLES

ZICO MULTIVERSAL NOZZLE BRACKET

September 23, 2009 – 8:01 am

The Multiversal Nozzle Bracket, model MVNB-1, is designed to hold a nozzle in a variety of different ways. It can be adjusted to mount vertically or horizontally and hold the nozzle both vertically or horizontally. The bracket can hold nozzles with up to a maximum handle width of 1-1/2″, a maximum handle length of 4-3/8″, [...]

By hubbardston20 | Also posted in BRACKETS | Comments (0)

POK SLIDE-O-MATIC DUAL PRESSURE NOZZLE

May 7, 2009 – 8:12 pm

 
POK’S NEW SLIDE-O-MATIC AUTOMATICN OZZLE HAS A FLOW RANGE OF 15-250 GPM FOR USE WITH WATER AND IS THE FIRST COMBINATION FOG NOZZLE DESIGNED TO PRODUCE AN EXCELLENT STREAM FOR USE WITH COMPRESSED AIR FOAM SYSTEMS (CAFS) 
PRODUCT SPEC SHEET 
 

By hubbardston20 | Comments (0)

TASK FORCE TIPS SHO-FLOW ELECTRONIC FLOW INDICATOR

September 25, 2008 – 8:53 am

The Sho-Flow water flow indicator is designed for installation behind a nozzle or on the outlet of a pump panel to quickly determine the flow present in the hose line and the pressure where the Sho-Flow is installed. Any firefighting, training, or testing operation that utilizes hose lines or nozzles is a potential application for [...]

By hubbardston20 | Comments (0)

BLUE DEVIL NOZZLE

September 25, 2008 – 8:19 am

Viper Nozzles - Blue Devil

New design to work up to 430 psi (30bar)
Professional results from lower gallonage
Deeper ribs in selector ring for better grip
Metal spinning teeth that are easier to replace
4 gallonage selection ring, without pattern change
Flush without shutting down
Constant flow through fog and straight stream

MORE INFO: http://www.cssupplyinc.com/Documents/BLUE%20DEVIL%20LITERATURE.pdf

By hubbardston20 | Comments (0)

ELKHART BRASS FLEX ATTACK COMPRESSED AIR FOAM NOZZLE

September 25, 2008 – 8:12 am

 Here’s a switch.
A nozzle that lets you go from foam to water with a click of the tip
Introducing the Flex Attack from Elkhart Brass. The new CAF nozzle quickly switches between wet foam, dry foam and water only without shutting down. Now there’s no need to compromise when fire fighting. Click up for a huge [...]

By hubbardston20 | Comments (0)

TASK FORCE TIPS TORNADO RC BUMPER TURRET

July 20, 2008 – 8:05 am

The Tornado RC is very compact yet it has a large 2.25” waterway making it the ideal bumper turret. Waterway with turning vane has only 19 psi friction loss at 500 gpm . Maximum operating pressure is 200 psi. Elevation range is 90 degrees above horizontal to 45 degrees below. Field changeable elevation travel stops [...]

By hubbardston20 | Comments (0)

ELKHART BRASS SOLID STREAM SOLID STRIKE NOZZLE

June 27, 2008 – 8:17 pm

The solid stream Solid Strike™ nozzle from Elkhart Brass. Unsurpassed flow performance with flexibility that allows the nozzleman to vary GPM or reach without shutting down to change tip size. The result is an airless stream of water so tight you can virtually see through it. And with the precision and strength you need to [...]

By hubbardston20 | Comments (0)